CATEGORIES
View All Tonium DJ Equipment.
Tonium Pacemaker 120gb Portable Dj Player £449.00
click on thumbnail to enlarge
Tonium Pacemaker 120gb Portable Dj Player
Welcome to the most portable DJ setup ever.. The Pacemaker is a pocket DJ setup which lets you mix tracks from the built in hard drive using the touchpad while on the move.
Pacemaker is a revolutionizing portable music player
equipped with an extensive range of professional
audio manipulation features enabling limitless mixing
between two independent channels.
Features
Mixing functionality
Dynamic beat detection 0.1 BPM precision
Cue auto-cue at track start, and set cue point.
Change Pitch alter speed and key of track 100%
Bend pitch momentarily alter speed of track.
Crossfade set the line out and/or phones blend
of the two channels.
Loop set loop, split loop from end-point, split loop from
in-point, exit loop, re-enter loop
Audio effects single parameter: hi-cut/lo-cut, two-parameter: roll, echo, reverb
Kill All reset and relaunch audio effects.
EQ 3-band equalizer; treble, mid and bass frequencies
-26 to +6 dB
Normalized sound globally normalize all tracks volumes
Gain pre-amplification volume -26 to +6 dB
Reverse play
P-switch
Press upwards to access features like pitch, looping, filters, effects and reversed play, through the alternate function of all input areas.
Press downwards for headphones control, as the crossfader switches to control the channel blend in the headphones, and the headphones volume is adjustable on the touchpad.
Display
TFT display
262.000 colours
166 ppi screen resolution
Rewind and forward
When pressing the P-switch, the rewind button sets the in-point of a loop, and the forward button the end-point.
To adjust loop in and end-points, press the P-switch upwards and either of the directional buttons, then adjust the desired point on the touchpad.
Channel 1 and Channel 2
Press left button to control channel 1, press right button to control channel 2. Full mixing functionality is available for both channels independently.
Pressing the P-switch upwards allows for toggling between time played and time left indication in the display.
Crossfader
Set at maximum left, channel 1 is alone in line out, set at maximum right, only channel 2 is in line out, and set in the middle, both channels are at the same line out level. Any variations hereof are of course possible blend options.
Press the P-switch downwards and the crossfader switches to control the channel blend in the headphones.
Play/pause
The play button behaves like on any other audio player, but when in Mix Mode, the pause is stuttering, allowing you to search and find the appropriate place to set the cue point.
When pressing the P-switch upwards, the play button reverses the play direction.
Cue
The Cue button sets the starting point for the track and can also be used to create effects. When pressing the P-switch upwards, the Cue button enables exiting and re-entering a loop.
Touchpad
The touchpad allows you to bend a track, change EQ values and gain levels.
When pressing the P-switch upwards, the touchpad allows for controlling and setting pitch values, filter parameters and audio effect levels.
When pressing the P-switch downwards, the touchpad allows for controlling the headphones volume.
The touchpad is also used to navigate the track library and the device settings.
Settings
The Settings button lets you turn on and turn off the device.
When turned on, the Settings button gives you access to the settings menu.
Kill All
The Kill All button resets all effect values to zero, and lets you relaunch effects to latest values per track and channel.
Specifications
Input and output
Line out connector, 3.5 mm stereo
Phones connector, 3.5 mm stereo
USB 2.0 connector, for data transfer
Power and charging
Power connector, for optimal charging. Pacemaker charges from empty to full in about 120 minutes; for up to 18 hours of playback time or up to 5 hours of mixing.
USB, for alternative charging.
Hard drive
120 GB
Audio formats supported
MP3, M4A (AAC-LC), AIFF,
FLAC, WAV, Ogg Vorbis, SND
Mac system requirements
Mac OS X v10.4.4 (Intel) or later
USB 2.0 port
Pacemaker Editor for Mac
Download the Pacemaker Editor for Mac
PC system requirements
Windows XP and Windows Vista
USB 2.0 port
Pacemaker Editor
Welcome to the most portable DJ setup ever.. The Pacemaker is a pocket DJ setup which lets you mix tracks from the built in hard drive using the touchpad while on the move.
Pacemaker is a revolutionizing portable music player
equipped with an extensive range of professional
audio manipulation features enabling limitless mixing
between two independent channels.
Features
Mixing functionality
Dynamic beat detection 0.1 BPM precision
Cue auto-cue at track start, and set cue point.
Change Pitch alter speed and key of track 100%
Bend pitch momentarily alter speed of track.
Crossfade set the line out and/or phones blend
of the two channels.
Loop set loop, split loop from end-point, split loop from
in-point, exit loop, re-enter loop
Audio effects single parameter: hi-cut/lo-cut, two-parameter: roll, echo, reverb
Kill All reset and relaunch audio effects.
EQ 3-band equalizer; treble, mid and bass frequencies
-26 to +6 dB
Normalized sound globally normalize all tracks volumes
Gain pre-amplification volume -26 to +6 dB
Reverse play
P-switch
Press upwards to access features like pitch, looping, filters, effects and reversed play, through the alternate function of all input areas.
Press downwards for headphones control, as the crossfader switches to control the channel blend in the headphones, and the headphones volume is adjustable on the touchpad.
Display
TFT display
262.000 colours
166 ppi screen resolution
Rewind and forward
When pressing the P-switch, the rewind button sets the in-point of a loop, and the forward button the end-point.
To adjust loop in and end-points, press the P-switch upwards and either of the directional buttons, then adjust the desired point on the touchpad.
Channel 1 and Channel 2
Press left button to control channel 1, press right button to control channel 2. Full mixing functionality is available for both channels independently.
Pressing the P-switch upwards allows for toggling between time played and time left indication in the display.
Crossfader
Set at maximum left, channel 1 is alone in line out, set at maximum right, only channel 2 is in line out, and set in the middle, both channels are at the same line out level. Any variations hereof are of course possible blend options.
Press the P-switch downwards and the crossfader switches to control the channel blend in the headphones.
Play/pause
The play button behaves like on any other audio player, but when in Mix Mode, the pause is stuttering, allowing you to search and find the appropriate place to set the cue point.
When pressing the P-switch upwards, the play button reverses the play direction.
Cue
The Cue button sets the starting point for the track and can also be used to create effects. When pressing the P-switch upwards, the Cue button enables exiting and re-entering a loop.
Touchpad
The touchpad allows you to bend a track, change EQ values and gain levels.
When pressing the P-switch upwards, the touchpad allows for controlling and setting pitch values, filter parameters and audio effect levels.
When pressing the P-switch downwards, the touchpad allows for controlling the headphones volume.
The touchpad is also used to navigate the track library and the device settings.
Settings
The Settings button lets you turn on and turn off the device.
When turned on, the Settings button gives you access to the settings menu.
Kill All
The Kill All button resets all effect values to zero, and lets you relaunch effects to latest values per track and channel.
Specifications
Input and output
Line out connector, 3.5 mm stereo
Phones connector, 3.5 mm stereo
USB 2.0 connector, for data transfer
Power and charging
Power connector, for optimal charging. Pacemaker charges from empty to full in about 120 minutes; for up to 18 hours of playback time or up to 5 hours of mixing.
USB, for alternative charging.
Hard drive
120 GB
Audio formats supported
MP3, M4A (AAC-LC), AIFF,
FLAC, WAV, Ogg Vorbis, SND
Mac system requirements
Mac OS X v10.4.4 (Intel) or later
USB 2.0 port
Pacemaker Editor for Mac
Download the Pacemaker Editor for Mac
PC system requirements
Windows XP and Windows Vista
USB 2.0 port
Pacemaker Editor
Tweet
Pacemaker is a revolutionizing portable music player
equipped with an extensive range of professional
audio manipulation features enabling limitless mixing
between two independent channels.
Features
Mixing functionality
Dynamic beat detection 0.1 BPM precision
Cue auto-cue at track start, and set cue point.
Change Pitch alter speed and key of track 100%
Bend pitch momentarily alter speed of track.
Crossfade set the line out and/or phones blend
of the two channels.
Loop set loop, split loop from end-point, split loop from
in-point, exit loop, re-enter loop
Audio effects single parameter: hi-cut/lo-cut, two-parameter: roll, echo, reverb
Kill All reset and relaunch audio effects.
EQ 3-band equalizer; treble, mid and bass frequencies
-26 to +6 dB
Normalized sound globally normalize all tracks volumes
Gain pre-amplification volume -26 to +6 dB
Reverse play
P-switch
Press upwards to access features like pitch, looping, filters, effects and reversed play, through the alternate function of all input areas.
Press downwards for headphones control, as the crossfader switches to control the channel blend in the headphones, and the headphones volume is adjustable on the touchpad.
Display
TFT display
262.000 colours
166 ppi screen resolution
Rewind and forward
When pressing the P-switch, the rewind button sets the in-point of a loop, and the forward button the end-point.
To adjust loop in and end-points, press the P-switch upwards and either of the directional buttons, then adjust the desired point on the touchpad.
Channel 1 and Channel 2
Press left button to control channel 1, press right button to control channel 2. Full mixing functionality is available for both channels independently.
Pressing the P-switch upwards allows for toggling between time played and time left indication in the display.
Crossfader
Set at maximum left, channel 1 is alone in line out, set at maximum right, only channel 2 is in line out, and set in the middle, both channels are at the same line out level. Any variations hereof are of course possible blend options.
Press the P-switch downwards and the crossfader switches to control the channel blend in the headphones.
Play/pause
The play button behaves like on any other audio player, but when in Mix Mode, the pause is stuttering, allowing you to search and find the appropriate place to set the cue point.
When pressing the P-switch upwards, the play button reverses the play direction.
Cue
The Cue button sets the starting point for the track and can also be used to create effects. When pressing the P-switch upwards, the Cue button enables exiting and re-entering a loop.
Touchpad
The touchpad allows you to bend a track, change EQ values and gain levels.
When pressing the P-switch upwards, the touchpad allows for controlling and setting pitch values, filter parameters and audio effect levels.
When pressing the P-switch downwards, the touchpad allows for controlling the headphones volume.
The touchpad is also used to navigate the track library and the device settings.
Settings
The Settings button lets you turn on and turn off the device.
When turned on, the Settings button gives you access to the settings menu.
Kill All
The Kill All button resets all effect values to zero, and lets you relaunch effects to latest values per track and channel.
Specifications
Input and output
Line out connector, 3.5 mm stereo
Phones connector, 3.5 mm stereo
USB 2.0 connector, for data transfer
Power and charging
Power connector, for optimal charging. Pacemaker charges from empty to full in about 120 minutes; for up to 18 hours of playback time or up to 5 hours of mixing.
USB, for alternative charging.
Hard drive
120 GB
Audio formats supported
MP3, M4A (AAC-LC), AIFF,
FLAC, WAV, Ogg Vorbis, SND
Mac system requirements
Mac OS X v10.4.4 (Intel) or later
USB 2.0 port
Pacemaker Editor for Mac
Download the Pacemaker Editor for Mac
PC system requirements
Windows XP and Windows Vista
USB 2.0 port
Pacemaker Editor
Welcome to the most portable DJ setup ever.. The Pacemaker is a pocket DJ setup which lets you mix tracks from the built in hard drive using the touchpad while on the move.
Pacemaker is a revolutionizing portable music player
equipped with an extensive range of professional
audio manipulation features enabling limitless mixing
between two independent channels.
Features
Mixing functionality
Dynamic beat detection 0.1 BPM precision
Cue auto-cue at track start, and set cue point.
Change Pitch alter speed and key of track 100%
Bend pitch momentarily alter speed of track.
Crossfade set the line out and/or phones blend
of the two channels.
Loop set loop, split loop from end-point, split loop from
in-point, exit loop, re-enter loop
Audio effects single parameter: hi-cut/lo-cut, two-parameter: roll, echo, reverb
Kill All reset and relaunch audio effects.
EQ 3-band equalizer; treble, mid and bass frequencies
-26 to +6 dB
Normalized sound globally normalize all tracks volumes
Gain pre-amplification volume -26 to +6 dB
Reverse play
P-switch
Press upwards to access features like pitch, looping, filters, effects and reversed play, through the alternate function of all input areas.
Press downwards for headphones control, as the crossfader switches to control the channel blend in the headphones, and the headphones volume is adjustable on the touchpad.
Display
TFT display
262.000 colours
166 ppi screen resolution
Rewind and forward
When pressing the P-switch, the rewind button sets the in-point of a loop, and the forward button the end-point.
To adjust loop in and end-points, press the P-switch upwards and either of the directional buttons, then adjust the desired point on the touchpad.
Channel 1 and Channel 2
Press left button to control channel 1, press right button to control channel 2. Full mixing functionality is available for both channels independently.
Pressing the P-switch upwards allows for toggling between time played and time left indication in the display.
Crossfader
Set at maximum left, channel 1 is alone in line out, set at maximum right, only channel 2 is in line out, and set in the middle, both channels are at the same line out level. Any variations hereof are of course possible blend options.
Press the P-switch downwards and the crossfader switches to control the channel blend in the headphones.
Play/pause
The play button behaves like on any other audio player, but when in Mix Mode, the pause is stuttering, allowing you to search and find the appropriate place to set the cue point.
When pressing the P-switch upwards, the play button reverses the play direction.
Cue
The Cue button sets the starting point for the track and can also be used to create effects. When pressing the P-switch upwards, the Cue button enables exiting and re-entering a loop.
Touchpad
The touchpad allows you to bend a track, change EQ values and gain levels.
When pressing the P-switch upwards, the touchpad allows for controlling and setting pitch values, filter parameters and audio effect levels.
When pressing the P-switch downwards, the touchpad allows for controlling the headphones volume.
The touchpad is also used to navigate the track library and the device settings.
Settings
The Settings button lets you turn on and turn off the device.
When turned on, the Settings button gives you access to the settings menu.
Kill All
The Kill All button resets all effect values to zero, and lets you relaunch effects to latest values per track and channel.
Specifications
Input and output
Line out connector, 3.5 mm stereo
Phones connector, 3.5 mm stereo
USB 2.0 connector, for data transfer
Power and charging
Power connector, for optimal charging. Pacemaker charges from empty to full in about 120 minutes; for up to 18 hours of playback time or up to 5 hours of mixing.
USB, for alternative charging.
Hard drive
120 GB
Audio formats supported
MP3, M4A (AAC-LC), AIFF,
FLAC, WAV, Ogg Vorbis, SND
Mac system requirements
Mac OS X v10.4.4 (Intel) or later
USB 2.0 port
Pacemaker Editor for Mac
Download the Pacemaker Editor for Mac
PC system requirements
Windows XP and Windows Vista
USB 2.0 port
Pacemaker Editor
Tweet
Found it Cheaper? Click here and use our Price Beat section
Or call us on 02380 231949 and we will beat it over the phone.
To find out more about price beat click here
Or call us on 02380 231949 and we will beat it over the phone.
To find out more about price beat click here
Finance is offered* on selected products and/or on purchases of a certain total value. finance available* on this item:
| 1 Year | £43.00 per month++ |
| 2 Years | £24.30 per month++ |
| 3 Years | £18.21 per month++ |
| 4 Years | £15.26 per month++ |
*finance is subject to status. ++ all figures quoted are estimations and subject to change, figures may also change according to your curcumstances and the finance company that we use.