CATEGORIES
View All Rane DJ Equipment.
Rane TTM57SL DJ mixer £1,199.00
click on thumbnail to enlarge
Rane TTM57SL DJ mixer
Rane have taken their two most famous products, the Serato Scratch Live and the TTM56 and put them in one clever box!
Rane also included internal effects with six stereo insert points.
The TTM 57SL allows the user to simultaneously:
Play a combination of digital and analog sources.
Play up to two digital files controlled by vinyl or CD while recording your mix.
Or, record two stereo sources when not using vinyl or CD control.
Cue analog and digital sources.
Operate standalone as a no-compromise performance mixer.
TTM 57SL Hardware Features
Two Input Buses
- PGM 1 selects: Analog 1, Analog 2, Digital 1, Digital 2
- PGM 2 selects: Analog 3, Analog 4, Digital 1, Digital 2
- All analog inputs are phono or line capable
- Input Gain and Left/Right Pan controls
- 3-band, full cut Tone controls with Kill switches
Magnetic faders for Channel Faders and Crossfader
- Non-contact magnetic position sensor technology. No travel noise - No bleed - Ever!
- Independent Contour and Reverse controls
Microphone Input with Engage switch, Level control and 2-band Tone control
Three sets of Outputs, each with independent Level controls
- Main Out on XLR (balanced)
- Booth Out on 1/4`` TRS (balanced)
- Auxiliary Out on RCA (unbalanced)
Assign Program 1, Program 2 or Both to external FlexFx loop
Internal Filter and Delay Effects with six possible insert points
- Pre- or Post-channel faders for Program 1 and Program 2
- Main Mix
- Auxiliary Input Bus
Headphone Cue Monitor includes Cue Pan, Main Mix select and Level
8 Channels of Streaming Audio
- 16 bit / 44.1 kHz Streaming Audio
- Four channels from computer
+ Stereo source Digital 1 and Digital 2
- Four channels to computer
+ Stereo Record 1 and Record 2
Stereo Recording
- Record 1 and Record 2 may record:
+ Pre- or Post-channel faders for Program 1 or Program 2
+ Main Mix
+ Auxiliary Input Bus
Vinyl / CD Control Inputs
- Stereo Record 1 may be used for 4-channels of control
- Select Analog 1 or Analog 2 for Control Input 1
- Select Analog 3 or Analog 4 for Control Input 2
Additional ``soft`` mixer controls used by Scratch LIVE & internal effects
- Foot switch input (Inputs on Tip and Ring; foot switch not included)
- Deck 1-2 switch
- Group switch
- B1 - B6 programmable switches
- P1 - P2 programmable Encoders with push switches
- J1 - J2 programmable Joysticks with push switches
USB firmware updates
Internal universal switching power supply
Rane also included internal effects with six stereo insert points.
The TTM 57SL allows the user to simultaneously:
Play a combination of digital and analog sources.
Play up to two digital files controlled by vinyl or CD while recording your mix.
Or, record two stereo sources when not using vinyl or CD control.
Cue analog and digital sources.
Operate standalone as a no-compromise performance mixer.
TTM 57SL Hardware Features
Two Input Buses
- PGM 1 selects: Analog 1, Analog 2, Digital 1, Digital 2
- PGM 2 selects: Analog 3, Analog 4, Digital 1, Digital 2
- All analog inputs are phono or line capable
- Input Gain and Left/Right Pan controls
- 3-band, full cut Tone controls with Kill switches
Magnetic faders for Channel Faders and Crossfader
- Non-contact magnetic position sensor technology. No travel noise - No bleed - Ever!
- Independent Contour and Reverse controls
Microphone Input with Engage switch, Level control and 2-band Tone control
Three sets of Outputs, each with independent Level controls
- Main Out on XLR (balanced)
- Booth Out on 1/4`` TRS (balanced)
- Auxiliary Out on RCA (unbalanced)
Assign Program 1, Program 2 or Both to external FlexFx loop
Internal Filter and Delay Effects with six possible insert points
- Pre- or Post-channel faders for Program 1 and Program 2
- Main Mix
- Auxiliary Input Bus
Headphone Cue Monitor includes Cue Pan, Main Mix select and Level
8 Channels of Streaming Audio
- 16 bit / 44.1 kHz Streaming Audio
- Four channels from computer
+ Stereo source Digital 1 and Digital 2
- Four channels to computer
+ Stereo Record 1 and Record 2
Stereo Recording
- Record 1 and Record 2 may record:
+ Pre- or Post-channel faders for Program 1 or Program 2
+ Main Mix
+ Auxiliary Input Bus
Vinyl / CD Control Inputs
- Stereo Record 1 may be used for 4-channels of control
- Select Analog 1 or Analog 2 for Control Input 1
- Select Analog 3 or Analog 4 for Control Input 2
Additional ``soft`` mixer controls used by Scratch LIVE & internal effects
- Foot switch input (Inputs on Tip and Ring; foot switch not included)
- Deck 1-2 switch
- Group switch
- B1 - B6 programmable switches
- P1 - P2 programmable Encoders with push switches
- J1 - J2 programmable Joysticks with push switches
USB firmware updates
Internal universal switching power supply
Found it Cheaper? Click here and use our Price Beat section
Or call us on 02380 231949 and we will beat it over the phone.
To find out more about price beat click here
Or call us on 02380 231949 and we will beat it over the phone.
To find out more about price beat click here
Finance is offered* on selected products and/or on purchases of a certain total value. finance available* on this item:
| 1 Year | £114.82 per month++ |
| 2 Years | £64.89 per month++ |
| 3 Years | £48.62 per month++ |
| 4 Years | £40.75 per month++ |
*finance is subject to status. ++ all figures quoted are estimations and subject to change, figures may also change according to your curcumstances and the finance company that we use.