CATEGORIES
View All Allen-and-Heath DJ Equipment.
Allen & Heath Xone202 £549.00
click on thumbnail to enlarge
Allen & Heath Xone202
Allen & Heath created the world`s greatest battle scratch mixer. The crossfader is made by Pro X Fade and can be easily replaced by removing the steel faceplate. They`ve kept the fader area clear for action and they`ve kept controls like pan and EQ out of the way on low profile sliders. Even the transform switches can be rotated to work the way you like them. Don`t go into battle with anything less.
Features:
2 Dual Stereo Channels
Channels have RIAA [RCA] inputs, switchable to line, plus stereo line level inputs [RCA], each with gain control. Powerful 3 band EQ on sliders. High quality 45mm faders. Input reverse switch for battle mixing. Pre fade monitoring on 12 segment 3 colour peak reading bar meters
Mic Channel
2 XLR inputs with separate gain controls, on switch and 3 band EQ with HPF. Routes direct to mix outputs. FX insert on button
Stereo Mix Outputs
Balanced mix outputs on XLR with multi-point VCA level master control. The mix output level can be displayed on the 12 segment 3 colour peak reading bar meters
Booth Output
RCA outputs with level control for booth / link out to additional daisy-chain mixers
FX Loop
Channels have an effect loop on switch with silent FET switching. Effect insert points are separate [TRS] inputs and outputs
3 Band EQ
Powerful 3 band 12dB/oct EQ: 6dB boost emphasis and -26dB cut for frequency band elimination
Transform Switches
Performance channel mute controls which can be rotated to work up/down or left / right
Engineer / DJ`s Toolbox
High powered headphone output with level and mute switch. Booth / link output on TRS with level. 12 segment 3 colour bar metering displays CH1&2 or mix. Channels have 12 segment 3 colour bar meters. CH1 / CH2 cue fader allows preview of x-fades
PSU
High performance internal switched-mode power supply. Universal mains input voltage
Specifications:
Maximum output level
MAIN OUT +23dBu into ]2K ohm load
EFFECT SEND +21dBu into ]2K ohm
LINK/BOOTH +21dBu into ]2K ohm
Internal headroom
Channels +21dBu
Mix to output +23dBu
Peak indicators meters : 12bar peak reading Peak on 8dB before clipping
Frequency response : 20Hz-30kHz 0/-1dB
Distortion THD+noise measured at +10dBu 1kHz 0.04%
Crosstalk channel shutoff measured at 1kHz : [90dB
MIC EI Measured with 150ohm load : 129dB
Residual output noise - non weighted 22Hz-22kHz filter : [88dBu
Mix noise - non weighted 22Hz-22kHz filter [-81dBu
Power Supply Internal switch mode power unit with auto sensing mains input.
Mains In socket IEC 3 pin
AC Mains 100-240V AC 50/60Hz
Consumption 30W max
Fuse Rating T500mA 20mm
Internal power rails +/- 16volts
Width x Height x Depth: 258mm x 360mm x 90mm (10.2 x 14.2 x 3.5)
Weight: 4.5kg / 9.9lb
Tweet
Features:
2 Dual Stereo Channels
Channels have RIAA [RCA] inputs, switchable to line, plus stereo line level inputs [RCA], each with gain control. Powerful 3 band EQ on sliders. High quality 45mm faders. Input reverse switch for battle mixing. Pre fade monitoring on 12 segment 3 colour peak reading bar meters
Mic Channel
2 XLR inputs with separate gain controls, on switch and 3 band EQ with HPF. Routes direct to mix outputs. FX insert on button
Stereo Mix Outputs
Balanced mix outputs on XLR with multi-point VCA level master control. The mix output level can be displayed on the 12 segment 3 colour peak reading bar meters
Booth Output
RCA outputs with level control for booth / link out to additional daisy-chain mixers
FX Loop
Channels have an effect loop on switch with silent FET switching. Effect insert points are separate [TRS] inputs and outputs
3 Band EQ
Powerful 3 band 12dB/oct EQ: 6dB boost emphasis and -26dB cut for frequency band elimination
Transform Switches
Performance channel mute controls which can be rotated to work up/down or left / right
Engineer / DJ`s Toolbox
High powered headphone output with level and mute switch. Booth / link output on TRS with level. 12 segment 3 colour bar metering displays CH1&2 or mix. Channels have 12 segment 3 colour bar meters. CH1 / CH2 cue fader allows preview of x-fades
PSU
High performance internal switched-mode power supply. Universal mains input voltage
Specifications:
Maximum output level
MAIN OUT +23dBu into ]2K ohm load
EFFECT SEND +21dBu into ]2K ohm
LINK/BOOTH +21dBu into ]2K ohm
Internal headroom
Channels +21dBu
Mix to output +23dBu
Peak indicators meters : 12bar peak reading Peak on 8dB before clipping
Frequency response : 20Hz-30kHz 0/-1dB
Distortion THD+noise measured at +10dBu 1kHz 0.04%
Crosstalk channel shutoff measured at 1kHz : [90dB
MIC EI Measured with 150ohm load : 129dB
Residual output noise - non weighted 22Hz-22kHz filter : [88dBu
Mix noise - non weighted 22Hz-22kHz filter [-81dBu
Power Supply Internal switch mode power unit with auto sensing mains input.
Mains In socket IEC 3 pin
AC Mains 100-240V AC 50/60Hz
Consumption 30W max
Fuse Rating T500mA 20mm
Internal power rails +/- 16volts
Width x Height x Depth: 258mm x 360mm x 90mm (10.2 x 14.2 x 3.5)
Weight: 4.5kg / 9.9lb
Tweet
Found it Cheaper? Click here and use our Price Beat section
Or call us on 02380 231949 and we will beat it over the phone.
To find out more about price beat click here
Or call us on 02380 231949 and we will beat it over the phone.
To find out more about price beat click here
Finance is offered* on selected products and/or on purchases of a certain total value. finance available* on this item:
| 1 Year | £52.57 per month++ |
| 2 Years | £29.71 per month++ |
| 3 Years | £22.26 per month++ |
| 4 Years | £18.66 per month++ |
*finance is subject to status. ++ all figures quoted are estimations and subject to change, figures may also change according to your curcumstances and the finance company that we use.