CATEGORIES
View All Ortofon DJ Equipment.
Ortofon Concorde Pro S £77.00
click on thumbnail to enlarge
Ortofon Concorde Pro S
Ortofon Concorde Pro S
Features:
- Unique headshell has a large cutout for improved stylus visibility
- Spherical stylus is perfect for tough handling and scratching
- Scratching and back-cueing impose heavy mechanical stress on the cantilever and its rubber bearing. Therefore, the Ortofon disco cartridges are equipped with cantilevers made from aluminium tube with increased wall thickness.
- Special attention has also been paid to the attachment of the bearing and the design of the bearing itself. This means that rough treatment will neither damage the cartridge nor degrade its stability.
Technical Specifications:
- Output voltage at 1000 Hz, 5cm/sec. 5 mV
- Channel balance at 1 kHz 2 dB
- Channel separation at 1 kHz 20 dB
- Channel separation at 15 kHz 15 dB
- Frequency range at - 3dB 20-20.000 Hz
- Frequency response 20-18.000 Hz + 3 / - 2 dB
- FIM distortion at recommended tracking force DIN 45.542 [ 1%
- Tracking ability at 315Hz at recommended tracking force 70 m
- Compliance, dynamic, lateral 7 m/mN
- Stylus type Spherical
- Stylus tip radius R 26 m
- Equivalent stylus tip mass 0,5 mg
- Tracking force range 3,0-5,0 g (30-50 mN)
- Tracking force, recommended 4,0 g (40 mN)
- Tracking angle 20
- Internal impedance, DC resistance 750 Ohm
- Internal inductance 450 mH
- Recommended load resistance 47 kOhm
- Recommended load capacitance 200-600 pF
- Cartridge color, body/stylus Black/Black
- Cartridge weight 18.5 g
Tweet
Features:
- Unique headshell has a large cutout for improved stylus visibility
- Spherical stylus is perfect for tough handling and scratching
- Scratching and back-cueing impose heavy mechanical stress on the cantilever and its rubber bearing. Therefore, the Ortofon disco cartridges are equipped with cantilevers made from aluminium tube with increased wall thickness.
- Special attention has also been paid to the attachment of the bearing and the design of the bearing itself. This means that rough treatment will neither damage the cartridge nor degrade its stability.
Technical Specifications:
- Output voltage at 1000 Hz, 5cm/sec. 5 mV
- Channel balance at 1 kHz 2 dB
- Channel separation at 1 kHz 20 dB
- Channel separation at 15 kHz 15 dB
- Frequency range at - 3dB 20-20.000 Hz
- Frequency response 20-18.000 Hz + 3 / - 2 dB
- FIM distortion at recommended tracking force DIN 45.542 [ 1%
- Tracking ability at 315Hz at recommended tracking force 70 m
- Compliance, dynamic, lateral 7 m/mN
- Stylus type Spherical
- Stylus tip radius R 26 m
- Equivalent stylus tip mass 0,5 mg
- Tracking force range 3,0-5,0 g (30-50 mN)
- Tracking force, recommended 4,0 g (40 mN)
- Tracking angle 20
- Internal impedance, DC resistance 750 Ohm
- Internal inductance 450 mH
- Recommended load resistance 47 kOhm
- Recommended load capacitance 200-600 pF
- Cartridge color, body/stylus Black/Black
- Cartridge weight 18.5 g
Tweet
Found it Cheaper? Click here and use our Price Beat section
Or call us on 02380 231949 and we will beat it over the phone.
To find out more about price beat click here
Or call us on 02380 231949 and we will beat it over the phone.
To find out more about price beat click here
Finance is offered* on selected products and/or on purchases of a certain total value.
More information on ++expected monthly payments can be found in your shopping cart.
More information on ++expected monthly payments can be found in your shopping cart.
*finance is subject to status. ++ all figures quoted are estimations and subject to change, figures may also change according to your curcumstances and the finance company that we use.